Description

Gefen DVI•2500HD Includes AC adapters and rack ears The DVI•2500HD uses 4 fibers to extend Dual Link DVI display up to 6,600 feet away from your source. Dual link DVI describes the use of all 24 pins of the DVI (digital visual interface) connector to achieve super high resolutions. How It Works The DVI•2500HD Sender unit sits next to your computer. A short video cable supplied with the DVI•2500HD system connects the DVI source to the DVI•2500HD Sender unit. The DVI•2500HD Receiver unit sits next to your DVI display and plugs into the DVI display’s Dual-Link DVI port. One CAT-5 cable and a LC fiber optic cable (4-strand) connects the Sender and the Receiver units to each other. Note The CAT5 cable is for the transmission of DDC/EDID (video timing, resolution) information, the Hot-plug signal and DC power. The fi ber cable carries the video picture information.DVI Extension can be: • up to 500m (1640 feet) over Multi-mode fiber using Virtual DDC. • up to 2 km (6,600 feet) over Single-mode fiber using Virtual DDC. • up to 100m (330ft) with direct DDC using CAT5. • LC terminated fiber optic cables (up to 2 pairs) are required for operation of the DVI•2500HD system. • A single CAT-5e cable will also be required when operating in Direct DDC mode only. • This device will accept both Single-Mode and Multi-Mode fiber optic cables. Manual available online: https://www.manua.ls/gefen/ext-dvi-2500hd/manual?p=1